Military phone A25 handle
Release time:2020-12-21
Features
1. The handle shell is made of special PC glass fiber reinforced engineering plastics.
2. One-piece structure, good airtightness, waterproof grade up to IP67, tight internal layout. The explosion-proof strength can reach IK09.
3. The handle has a mechanical switch button to control the call.
4. The use of anti-puncture, high-fidelity, waterproof transmitter and receiver to ensure the call transmission characteristics of the supporting phone. The transmitter has an impedance of 150 ohms with dynamic anti-noise function, and the receiver is a high-fidelity type with an impedance of 1000 ohms, conforming to GB/T15279-2002 Requirements of 4.2.
5. The standard configuration at the rear of the handle is a 5-core Amphenol AP-125 (U-128/U) aviation connector, which is suitable for AN/PRC-70 and AN/PRC-77 radio communication equipment, and can also be changed according to customer needs. The interface mode and connector model.
Product parameter
|
Ambient temperature |
-45～+55℃ |
|
Relative temperature |
-10%～95% |
|
Atmospheric pressure |
-80～110KPa |
|
Environmental noise |
-≤100dB |
|
working frequency |
-200～4000 Hz |
Packing List
Outer box size：430*390*380mm
25PCS/CTN
12.5Kg/CTN
User choice
There is a standard configuration for any handle design, but the following changes can also be made
1. The color of the handle can be changed according to customer needs
2. The length of the spring wire can be changed according to customer needs
3. Wiring principle and connector can be changed according to customer needs
about us
